Wyoming · Remodeling licensing · official-source guide
Wyoming does not license remodeling contractors at state level. No state board classifies or tests them, and the Wyoming Secretary of State only registers your business entity. Under W.S. 15-1-103, cities license instead: Casper, Laramie and Rock Springs each issue their own contractor license or registration. State law still controls electrical work, storm damage contracts and lien notices.
State-level license
No — see local details
Public lookup
Not published
Verified against agency sources on 2026-10-05. Rules and fees change; confirm with the named authority before relying on this guide.
Wyoming does not license remodeling contractors at the state level. No state board writes remodeling classifications, gives a remodeling exam, or issues a remodeling license. The Wyoming Secretary of State registers business entities through its Business and UCC Center, and that filing proves your company exists, not that you may build. Licensing authority sits with cities and towns. W.S. 15-1-103(a)(xiii) lets a city or town license, tax and regulate any business conducted within its limits, with license taxes uniform across a class of business. Wyoming cities use that power hard. Casper issues classed general and sub contractor licenses through its Community Development Department. Laramie issues building contractor licenses plus a separate qualified supervisor certificate through Code Administration. Rock Springs registers contractors through the Building Inspection Office before any work starts inside city limits. Each city sets its own classes, fee table, insurance limits and accepted exams. A remodeler who books a bathroom in Casper and an addition in Laramie in the same month carries two licenses, not one. Inspection authority is delegated the same way. Under W.S. 35-9-121(a) the state fire marshal delegates full authority to municipalities and counties that apply to enforce local or state fire, building, existing building or electrical safety standards meeting state minimums, and transfers jurisdiction by letter. So in Wyoming the licensing question is always which city, never which state board. Build the compliance list jurisdiction by jurisdiction before you price the job.
Sourceswyoleg.gov 1sos.wyo.gov 2casperwy.gov 3cityoflaramie.org 4rswy.net 5wyoleg.gov 6
The absence of a state remodeling license does not leave you unregulated. Four bodies of Wyoming law reach every remodeler in the state. First, electrical work. W.S. 35-9-123(a) requires licensed electrical contractors employing licensed master or journeyman electricians, or registered apprentices under their supervision, to install all electrical equipment, with listed waivers including property the owner is wiring himself when it is not for immediate resale. Your electrical sub carries a state license from the chief electrical inspector, who under W.S. 35-9-122 licenses electrical contractors, masters, journeymen, low voltage contractors, limited contractors and technicians. Second, storm damage work. Title 40, Chapter 12, Article 7 governs contracts to repair or replace roof, siding or gutter systems on residential buildings of up to four units. Third, consumer protection. W.S. 40-12-105 makes a list of knowing misrepresentations in a consumer transaction an unlawful deceptive trade practice, including representing that repair or replacement is needed when it is not, representing a sponsorship or approval you do not have, and advertising merchandise with intent not to sell it as advertised. W.S. 40-12-102(a)(vi) defines merchandise to include any service, so remodeling labor is covered. Fourth, lien law. W.S. 29-2-112 conditions your construction lien rights on a written preliminary notice to the record owner. None of these depend on a city license. All of them apply the day you take a Wyoming remodeling deposit.
Casper publishes the clearest remodeling classification in Wyoming. Its Community Development Department issues five general classes. Class I authorizes construction, repair or alteration of any structure. Class IIA covers residential and commercial structures up to twelve thousand square feet of total area within the building footprint. Class IIB covers residential structures up to and including apartment buildings of four dwelling units. Class III is the remodeling class: it authorizes the holder to repair, remodel or alter single-family residences up to twenty five percent of the total square footage of the residence. Class IV is a maintenance and repair class with a tightly drawn scope, including drywall patching that does not open entire wall sections, roofing shingle repair not exceeding one percent of existing roof area, window and door replacement that does not require structural alteration, deck repair excluding structural components, retaining walls six feet or less, fences, accessory buildings under two hundred square feet, toilet and flange replacement, dishwasher swaps, and changing lamps in existing fixtures. Read those scope lines before you pick a class. A whole-house gut that passes twenty five percent of the floor area pushes you out of Class III and into Class IIB or higher. Casper also licenses single trades separately, including roofing, framing, drywall, demolition and mobile home work, and runs plumbing and mechanical contractor, master, journeyman and apprentice licenses through the same department. If you sub the trades out, your subs need their own Casper licenses.
Sourcescasperwy.gov 1casperwy.gov 2
Casper ties each class to years of experience and a passed exam. Class I requires a minimum of eight years of experience in both residential and commercial construction. Class IIA and Class IIB require six years, Class IIA across residential and commercial work and Class IIB in residential work. Class III, the remodeling class, requires a minimum of four years of experience in residential construction. Class IV requires two years in building, plumbing, mechanical or electrical maintenance components. Every class also requires proof of successful testing applicable to the category. For Class III, Casper lists International Code Council exams F46-N, G11-N, G12-N and G13-N, or equivalent. Class IIB lists G11-N, G12-N and G13-N. Casper offers an in-house exam for the Class IV classification and for mobile home installer. The published fee table charges $300.00 for a new Class I license and $150.00 to renew it. Class IIA, Class IIB, Class III and Class IV each cost $150.00 new and $75.00 to renew. Roofing, framing and demolition contractor licenses are $150.00 new and $75.00 renewal, and drywall contractor is $125.00 new and $62.50 renewal. Minimum insurance for the licenses flagged on that table is $250,000.00 for public liability or personal injury or death of one person from one incident, $500,000.00 for injury or death of all persons from one incident, and $250,000.00 for property damage from one incident. Casper requires the certificate of insurance and the fee before it issues the license.
Sourcescasperwy.gov 1casperwy.gov 2
Casper is the one Wyoming jurisdiction that publishes a reciprocity path in plain terms, and it is the cheapest way into the market for a remodeler already licensed elsewhere in the state. The reciprocal contractor license grants the right to carry on electrical, plumbing, mechanical or general contracting under the classification the applicant already holds in another Wyoming jurisdiction, where that classification is equivalent to Casper licensure. The applicant carries the proof burden. You submit documentation showing the license held in the other Wyoming jurisdiction is current and in good standing, plus proof of having passed testing comparable to what Casper requires for the class. The fee drop is large. A reciprocal general license in Class I, IIA, IIB, III or IV costs $50.00 new and $25.00 to renew, against $150.00 new for a direct Class III application. Reciprocal roofing, framing, concrete flatwork, concrete general, insulation and mobile home installer licenses are also $50.00 new and $25.00 renewal. Reciprocal contractor-entity licenses in the trades, such as plumbing contractor, mechanical contractor and electrical contractor, are $5.00 new and $3.00 renewal, while the individual master and journeyman reciprocal licenses are $50.00 new and $25.00 renewal. Insurance does not get easier: the reciprocal minimums match the direct ones at $250,000.00, $500,000.00 and $250,000.00. Note that reciprocity here runs in-state only. A license from another state does not qualify you on its face.
Sourcescasperwy.gov
Laramie splits the license from the person. Code Administration issues four building contractor classifications. Class A is a general contractor license for commercial and residential work of any type or size. Class B covers permits for one, two, three or four family residential buildings of two stories or less, other residential buildings including shops, garages, pole barns and storerooms, repairs not affecting structural integrity, non-structural tenant finish, and one-story commercial buildings of 2500 square feet or less. Class R is the residential class, covering construction, alteration, addition or repair of detached single-family dwellings not more than three stories above grade with a separate means of egress, plus accessory structures. Class C is the building sub-contractor class for roofing, siding, egress windows, permitted fences and signs. Every license holder must be represented at all times by a person holding a current Laramie master or supervisor certificate of qualification. That supervisor signs the application, agrees to oversee the work, and serves as the primary contact with the city. If the certificate holder leaves your employ you must notify the city within ten days. Failure of the certificate holder to supply personal supervision as the Laramie Municipal Code requires is grounds for license suspension. The application also makes you initial three acknowledgements: that trade subcontractors are licensed with Laramie, that building subcontractors working under your permit carry general liability insurance, and that permits stay clearly visible at the job site.
Laramie attaches the experience and exam requirement to the qualified supervisor, not to the company. Class A needs a supervisor with seven years of experience in the construction trade and a pass on the International Code Council National Standard General Building Contractor (A) exam F11 or G11. Class B needs five years and the ICC National Standard General Building Contractor (B) exam F12 or G12. Class R, the class most residential remodelers want, needs five years of construction trade experience and a pass on the ICC National Standard Residential Building Contractor exam F13 or G13. Class C needs a supervisor with three years of experience in the trade and no listed exam. Contractor fees are $500 new and $200 renewal for Class A, and $450 new with $150 renewal for Class B and Class R. The qualified supervisor certificate is billed on top: $100 new and $50 renewal for Class A, Class B and Class C. Liability insurance limits scale with the class, with Laramie Code Administration named as certificate holder and entitled to 20-day notice of cancellation. Class A carries $1,000,000 per occurrence and $2,000,000 total aggregate. Class B and Class R each carry $500,000 per occurrence and $1,000,000 total aggregate. Class C carries $300,000 per occurrence and $600,000 total aggregate. The filing packet also demands a notarized verification of experience signed by someone other than yourself, a current copy of the supervisor exam pass, and copies of any other city or state licenses you hold.
Rock Springs is lighter on classification and heavier on identification. The Building Inspection Office requires three things submitted before any work is performed within the city: the application form, a registration fee of $125.00 payable by cash or check to the City of Rock Springs, and a certificate of insurance. The published minimum limits are $100,000 property damage, $100,000 for bodily injury or damage including death to any person, and $250,000 for bodily injury or damage including death to more than one person. The certificate must show the City of Rock Springs at 212 D Street as the certificate holder, and the completed packet goes to the Department of Public Services at City Hall. Then comes the rule most remodelers miss. Under city ordinance, the name and phone number of the contractor must be visibly displayed in letters of at least two inches on all large equipment and vehicles used or parked at construction sites. The signage must be permanently affixed or magnetically adhered. Failure to display it results in work stoppage or the contractor being put out of compliance. That is a hard advertising mandate, not a suggestion, and it is enforced on the truck sitting at the curb. Rock Springs also keeps an online database that lets the public search registered contractors and issued permits, which means a homeowner can check your registration before you finish the walkthrough. Register first, letter the truck second, quote third.
Sourcesrswy.net
Wyoming gives homeowners two separate cancellation rights, and a remodeler can trip either one. The first is the home solicitation sale rule in W.S. 40-12-104. It applies where the cash sales price exceeds twenty five dollars and the seller or someone acting for him personally solicits the sale at the buyer's residence, with the agreement given there. Contact by telephone counts as personal solicitation. Because W.S. 40-12-102(a)(vi) defines merchandise to include any service, a remodeling sale closed at the kitchen table is covered. The buyer may cancel until midnight of the third business day after signing a complying agreement, by written notice to the seller at the address stated in the agreement, and notice by mail counts when it is deposited properly addressed with postage prepaid. The cancellation clock does not even start until the buyer gets a copy of the completed, approved and accepted contract, the name and address for cancellation notices, and a written statement of the cancellation right complying with W.S. 40-14-253(b). After cancellation the seller has ten days to tender back payments and any note, and may retain a cancellation fee of five percent of the cash price but never more than the cash down payment, and nothing at all if the seller failed its own obligations. A narrow emergency exception exists where the buyer asked for work without delay and the seller made a substantial beginning of performance before notice. Deals negotiated at your own place of business after a home contact are excluded.
Sourceswyoleg.gov
Roofing, siding and gutter work after a hail or wind event is the one slice of Wyoming remodeling with its own statute. Title 40, Chapter 12, Article 7 defines a contractor as a person in the business of contracting with an owner or possessor of residential real estate to repair or replace roof, siding or gutter systems, and covers dwellings of up to four units plus ancillary structures. W.S. 40-12-703 requires the repair proposal to disclose, in writing and inside the proposal, a precise description and location of all damage claimed, a detailed description and itemization of any emergency repairs already completed, and identification of any damaged areas excluded from the proposal with the reasons for exclusion. W.S. 40-12-704 requires the contract to include a copy of that proposal. W.S. 40-12-705 gives the consumer three business days to cancel from the date the contract was entered into, or three business days after written notice from the insurer that the claim was denied in whole or in part, whichever is later. Before signing, you must hand the consumer a boldface statement of at least twelve point type explaining that right, plus a fully completed NOTICE OF CANCELLATION form in the same type size. The consumer may waive the three day window only in a signed writing accompanied by the insurer's written approval of the claim. On cancellation you return payments within three days, though documented emergency repairs can be billed separately. W.S. 40-12-702(c) bans paying or rebating any part of an insurance deductible, claiming to act as an adjuster, and contracting for exclusive representation on the claim.
Sourceswyoleg.gov
This is where Wyoming surprises contractors who assumed no state license means no advertising rules. For exterior storm damage repair services, W.S. 40-12-702(a) requires anyone contacting a consumer to solicit the work, including in general advertisements, to disclose the business name and whether the contractor carries general liability insurance and any licensure required by the authority having jurisdiction. W.S. 40-12-702(b) goes further: since July 1, 2017 the contractor license or registration number for the jurisdiction where the license is held must appear in all contracts, bids and advertisements involving exterior storm damage repair services, where that jurisdiction requires a license. Put the number on the estimate, the proposal, the website page that sells roof and siding work, and the paid ads that drive those calls. W.S. 40-12-702(c)(iii) also bars accepting money or compensation in exchange for letting another contractor use your business name or license number to pose as licensed. Rock Springs adds a physical display rule: contractor name and phone number in letters of at least two inches, permanently affixed or magnetically adhered, on all large equipment and vehicles used or parked at construction sites, with work stoppage as the consequence. Laramie requires permits to be clearly visible at the job site. On top of that, W.S. 40-12-105 makes it an unlawful deceptive trade practice to knowingly claim a sponsorship, approval or affiliation you do not have, so calling yourself state licensed in Wyoming is a legal problem, not marketing license.
Wyoming puts a trap in front of remodelers who take a deposit first and paper the job later. W.S. 29-2-112 makes a written preliminary notice a condition of lien rights. The contractor, subcontractor and materialman must send the record owner or the owner's agent written notice of the right to assert a lien against the property if they are not paid, and of the right of the owner or contractor to obtain a lien waiver on payment. Timing is the part that bites. The contractor must send the notice before receiving any payment from the owner, including advances. A subcontractor or materialman has thirty days after first providing services or materials. Failure to send the notice within the time specified bars the right to assert a lien at all. The notice must be in substantially the same format and contain the same information as the form in W.S. 29-10-101, and the form is available from the county clerk's office in each county. There is a second duty alongside it. W.S. 29-2-113 requires the contractor, at the time of contracting with subcontractors and materialmen, to give them the name and address of the record owner and the owner's agent where applicable, plus the legal description of the project site. Practical takeaway for a remodeler: the notice goes out with the signed contract, before the deposit check clears, every time. A deposit accepted without it costs you the lien on that job permanently.
Sourceswyoleg.gov
Renewal in Wyoming is a city calendar, not a state one, and the calendars are unforgiving. Laramie licenses run from January 1 through December 31 of each calendar year. All licenses expire on December 31, and the renewal window opens November 15 annually. Miss the December 31 deadline in Laramie and you do not pay a late fee, you buy a new license at the new license price, which is the difference between $150 and $450 for Class R or Class B and between $200 and $500 for Class A, with the supervisor certificate renewal at $50 against $100 new. Laramie also runs new license applications and renewals entirely through its Civic Access web portal rather than on paper. Casper publishes a separate renewal fee for every classification, which is generally half the new license fee: $150.00 to renew Class I, $75.00 to renew Class IIA, IIB, III or IV, $62.50 for drywall contractor, and $25.00 for a reciprocal general license. Casper also requires proof of insurance and payment of the fee before issuance, so a lapsed certificate of insurance can stall a renewal. None of the three cities publishes a continuing education hour requirement for a general remodeling license. What they do publish is a code cycle obligation. Laramie adopted the 2024 International Code Council cycle effective September 1, 2024, holds code update briefings, and expects license holders to be familiar with the Laramie Unified Development Code and the adopted International Code series.
Sourcescityoflaramie.org 1cityoflaramie.org 2casperwy.gov 3casperwy.gov 4
The money penalty for working without a license in Wyoming is set by the city, and Laramie publishes the sharpest number. A general contractor or qualified supervisor without the required license gets a warning and a 72-hour grace period to get licensed. No building permits are issued until licensing is complete, any work already started without proper licensing and permitting draws a stop work order, and a fine of $750.00 per day is assessed once the 72-hour grace period expires. Rock Springs enforces its registration and signage rules with work stoppage or an out-of-compliance status. Casper conditions issuance on the certificate of insurance and fee, and its licenses carry scope limits that an inspector reads literally. Electrical work has state teeth. W.S. 35-9-130(a) makes a violation of the electrical safety act a misdemeanor, punishable for an individual, including an officer or agent who participates in or is an accessory to the violation, by a fine of up to $500.00, up to six months imprisonment, license revocation, or a combination. A corporation faces a fine of up to $1,000.00, revocation, or both. W.S. 35-9-130(c) adds a civil penalty of up to $500.00 for a first violation of the licensed installer rule and up to $1,000.00 for a later offense within three months. The electrical board may also suspend or cancel a license for a repeated or serious violation, a serious violation being one posing risk of injury or death or likely property damage above $2,500.00. Consumer statute violations route to private damages under W.S. 40-12-108.
Sourcescityoflaramie.org 1rswy.net 2wyoleg.gov 3wyoleg.gov 4
Wyoming has no statewide contractor license lookup, because it has no statewide contractor license. There is also no state contractor recovery fund of the kind some states fund from license fees, and nothing in the consumer protection or lien statutes creates one. Verification happens in three places instead. First, the city that licensed you. Laramie publishes a list of licensed contractors and tells homeowners to check it or call Code Administration, and Rock Springs runs an online database that searches registered contractors and issued permits. Casper verification goes through the Community Development Department that issued the license. Second, the Wyoming Secretary of State, whose Business and UCC Center lets anyone search and obtain filed business documents and certificates of good standing for your entity. Third, your own paperwork, which is why the storm damage statute forces the jurisdiction license number onto contracts, bids and advertisements. When a homeowner is made whole in Wyoming, it is through remedies rather than a fund. W.S. 40-12-108 lets a person relying on an uncured unlawful deceptive trade practice sue for actual damages and allows class actions with attorney fees. W.S. 40-12-706 routes storm damage article violations into those same remedies. W.S. 40-12-109 sets the notice window: written notice to the alleged violator within one year of discovery or two years of the transaction, whichever comes first. So your license, your insurance certificate and your contract are the proof a Wyoming homeowner actually gets.
Sourcescityoflaramie.org 1rswy.net 2sos.wyo.gov 3wyoleg.gov 4
The filings that actually gate your first Wyoming remodel are the business ones. Start with the Wyoming Secretary of State. Its Business and UCC Center is where you file a Wyoming limited liability company, profit corporation, nonprofit or limited partnership online, file the annual report that keeps the entity alive, obtain a certificate of good standing, reinstate a lapsed entity, and search filed business documents. City license packets lean on those records: Laramie asks for your business name, business address and entity type on the application and for copies of any other city or state licenses you already hold. Next come the tax accounts. The Wyoming Department of Revenue runs registration and filing through the Wyoming Internet Filing System, which handles sales and use tax registration and filing for both vendors and consumers, contractor registration and reporting, and online payment by ACH debit or credit card. You create a username and password and the department issues a unique PIN by email, and you can create sub-accounts so staff or your accountant can file. Employment brings a third account. Wyoming workers compensation is administered by the Department of Workforce Services, which runs employer wage reporting and coverage, and Laramie will not issue your license without a State of Wyoming Workers Compensation Certificate of Good Standing naming Code Administration as recipient. None of the three verified city programs publishes a surety bond requirement for a general remodeling license, so budget for liability insurance and workers compensation proof instead, and confirm bond terms separately for any public project. Do the entity filing, the revenue registration and the coverage account before you chase permits.
Sourcessos.wyo.gov 1excise-wyifs.wy.gov 2dws.wyo.gov 3cityoflaramie.org 4
These are common details other guides publish about Wyoming, but we could not verify them from the agency source. Confirm them directly before relying on them.
No. Wyoming has no state contractor license and no state board that classifies or tests remodelers. Licensing comes from cities and towns under W.S. 15-1-103(a)(xiii), which lets them license, tax and regulate any business inside their limits. Casper, Laramie and Rock Springs each run their own program, so you license per city, not per state.
Casper Class III is the remodeling class. It authorizes repair, remodel or alteration of single-family residences up to twenty five percent of the total square footage of the residence. It requires four years of residential construction experience plus a passed exam. Work past that twenty five percent threshold needs Class IIB or higher from the Community Development Department.
Laramie attaches experience to the qualified supervisor. Class R, for detached single-family dwellings up to three stories, needs a supervisor with five years of construction trade experience. Class B also needs five years, Class A needs seven, and Class C needs three. Experience must be verified by someone other than yourself and signed in front of a notary.
Both published programs use International Code Council exams. Laramie Class R requires the ICC National Standard Residential Building Contractor exam F13 or G13. Casper lists F46-N, G11-N, G12-N and G13-N, or equivalent, for Class III. Casper gives its own in-house exam only for the Class IV maintenance license and mobile home installer.
Rock Springs charges a $125.00 registration fee, payable by cash or check to the City of Rock Springs. You submit it with the application form and a certificate of insurance to the Department of Public Services at 212 D Street before performing any work in the city. The city must be named as certificate holder on the insurance.
They differ by city and class. Casper requires $250,000.00 per person, $500,000.00 all persons per incident and $250,000.00 property damage. Laramie runs $500,000 per occurrence and $1,000,000 aggregate for Class R and Class B, rising to $1,000,000 and $2,000,000 for Class A. Rock Springs requires $100,000, $100,000 and $250,000.
Sometimes. Casper issues a reciprocal contractor license recognizing an equivalent classification held in another Wyoming jurisdiction, at $50.00 new and $25.00 renewal for general classes, if you prove the other license is current and in good standing and that your testing is comparable. It is in-state reciprocity only, and the insurance minimums stay the same.
Two rules apply. Under W.S. 40-12-104, a sale solicited at the home above twenty five dollars can be cancelled until midnight of the third business day after signing, and the clock does not start until the buyer receives the completed contract and a written cancellation statement. Storm damage repair contracts get their own three business day right under W.S. 40-12-705.
For exterior storm damage repair services, yes. Since July 1, 2017, W.S. 40-12-702(b) requires the jurisdiction license or registration number to appear in all contracts, bids and advertisements for that work where a license is required. Solicitations must also disclose the business name and whether you carry general liability insurance.
You get a warning with a 72-hour grace period. No building permits are issued until you hold both the contractor license and the qualified supervisor license, any work already begun draws a stop work order, and a fine of $750.00 per day is assessed once the grace period expires. Rock Springs answers noncompliance with work stoppage.
Before receiving any payment from the owner, including advances. W.S. 29-2-112 requires written notice to the record owner of your right to assert a lien and the owner's right to a lien waiver on payment. Sending it late bars your lien entirely. The form matches W.S. 29-10-101 and is available at county clerk offices.
No state fund appears in Wyoming statute, which fits a state with no state license to fund one. Homeowner remedies are private. W.S. 40-12-108 allows suit for actual damages from an uncured deceptive trade practice, with class actions and attorney fees, and W.S. 40-12-706 routes storm damage violations there. W.S. 40-12-109 sets the notice deadlines.
We can review the local market, your current search visibility, and paid-search fit before recommending any marketing work.